The camera itself is mounted on the end of a 30m length of tough cable, and incorporates a lockfast fitting, allowing the camera to be propelled down the pipeline using a set of standard drain rods. The PGL Drain Camera is supplied with a plastic sleeve and a larger skid which allows water to flow past.
Operation
1. Connect the system to the mains and remove the camera and cable from the case
2. Plug the 5-Pin DIN connector into the Camera
3. Turn the monitor on – the power LED should illuminate
4. Attach the camera to your drain rods
5. View the picture as you push the camera down – adjust to give an upright view
Specification
Supply Voltage – 100-230V AC via 12V adaptor
Power Consumption – 10W
Operating Temperature – 0 to 40 Degrees
Monitor – 5.6” LCD picture
Camera – 35mm colour camera
Weight – approx 6.1kg